直流微型斷路器 · RTS-DC63-500
2P 直流微型斷路器，500V，6-63A
專為太陽能串聯及直流電路保護設計的雙極直流微型斷路器，額定電壓為直流 500V，提供 6A 至 63A 共九種電流規格。.
直流 500V額定電壓
6A-63A九項標示的額定電流值
2P桿的配置
35mm DIN 導軌安裝方法
產品概覽
The RTS-DC63-500 is a two-pole DC miniature circuit breaker family with a listed DC 500V rating and nine current options from 6A to 63A. This page groups the selectable configurations within one family. Specify the required current rating and quantity for quotation; confirm the exact supplied model, DC breaking capacity and approved wiring arrangement for that configuration before selection.
主要特色
- 直流微型斷路器的架構
- 九種額定電流，範圍從 6A 到 63A
- 雙極配置
- 35mm DIN 導軌安裝
- 6 kA DC breaking capacity
可選型號／規格
請選擇 RTS-DC63-500 額定電流，同時不擴大文件中記載的 DC 500V、2P 產品適用範圍。.
| 系列 | 當前評級 | 額定電壓 | 桿的配置 |
|---|---|---|---|
| RTS-DC63-500 | 6A / 10A / 16A | 直流 500V | 2P |
| RTS-DC63-500 | 20A / 25A / 32A | 直流 500V | 2P |
| RTS-DC63-500 | 40A / 50A / 63A | 直流 500V | 2P |
A current option identifies one configuration within this family. The quotation should identify the exact supplied model and any differences from the requested ratings or wiring requirements.
技術規格
| 參數 | 產品資訊 |
|---|---|
| 型號 | RTS-DC63-500 |
| 產品類型 | 直流微型斷路器 (MCB) |
| 額定電壓 | 直流 500V |
| 額定電流 | 6A / 10A / 16A / 20A / 25A / 32A / 40A / 50A / 63A |
| 桿的配置 | 2P |
| 幀電流 | 63A |
| DC Breaking Capacity | 6 kA. Confirm the applicable DC voltage, rating designation and approved pole wiring for the ordered configuration. |
| 安裝方式 | 35mm DIN 導軌 |
| 認證 | IEC 60947-2; certificate verified by RITOKS. |
應用
附圖展示的是一般性的應用環境，並非具體的安裝配置。.
太陽能光伏匯流箱
直流電路保護，其文件記載的直流 500V 額定值與選定的電流額定值須符合該電路之需求。.
光伏串保護
適用於相容之光伏串聯電路的兩極保護。.
直流配電迴路
在確認額定電流及接線配置後，進行 DIN 導軌電路保護。.
選定前需確認的資訊
- Required current rating and quantity for each configuration.
- Application and destination country.
- Maximum circuit voltage, including the relevant PV or battery operating limits.
- Prospective short-circuit current at the installation point, if established.
- Grounding arrangement and required conductor switching/protection.
- Whether charging, discharging or other reverse-current conditions are possible.
- Cable and installation details relevant to the selected configuration.
- Required model-specific datasheet, approved wiring diagram and compliance evidence.
常見問題
目前有哪些電流額定值可供選擇？
可選的額定電流值為 6A、10A、16A、20A、25A、32A、40A、50A 及 63A。.
這是 MCB 還是 MCCB？
這是一款直流微型斷路器（MCB）。該頁面並未介紹模組化斷路器（MCCB）或馬達保護斷路器。.
下單前應確認哪些事項？
Confirm the RTS-DC63-500 current option, maximum circuit voltage, fault-current requirement, grounding arrangement, current direction, quantity and destination country. Ask for the exact supplied model reference and the approved DC wiring and breaking-capacity information for that configuration.
Does 2P define the permitted DC wiring arrangement?
No. The pole count alone does not define the permitted connection, polarity or supply direction. Request the approved wiring diagram for the exact supplied model and system arrangement before installation.
相關產品
索取報價
For an RTS-DC63-500 quotation, provide the current rating and quantity per option, application, maximum DC voltage and destination country. Include fault-current, grounding and current-direction requirements where known. Specify which model-specific technical and compliance documents you need, and request a clear list of any deviations from your requirements.