Power Distribution Components · Automatic Transfer Switches
G2R-63 II DIN Rail Automatic Transfer Switch 6A-63A
G2R-63 II PC-class automatic transfer switches provide 2P and 4P DIN-rail configurations with nine rated-current options from 6A to 63A for dual-source power transfer.
2P / 4PPole configurations
6A-63ANine rated-current options
<50msManufacturer-listed transfer time
50/60HzRated frequency
Product Overview
The G2R-63 II is a compact two-position automatic transfer switch for switching a load between two compatible AC power sources. The documented family supports automatic and manual operation in 2P and 4P formats. Voltage, pole format and rated current must be confirmed independently for the intended system.
Key Features
- PC-class infrequent automatic transfer architecture
- Automatic and manual operation
- 2P and 4P pole formats
- Nine rated-current choices from 6A to 63A
- AC 110V and AC 220V rated operational voltage options
- DIN-rail installation
- Manufacturer-listed transfer time below 50ms
Available Configurations
Select a pole format and rated operational current, then confirm the required AC operational voltage. The available evidence does not map a voltage option to a specific pole format.
| Configuration | Poles | Rated Current | Transfer Architecture |
|---|---|---|---|
| G2R-63 II 2P / 6A | 2P | 6A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 10A | 2P | 10A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 16A | 2P | 16A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 20A | 2P | 20A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 25A | 2P | 25A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 32A | 2P | 32A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 40A | 2P | 40A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 50A | 2P | 50A | Two-position automatic/manual transfer |
| G2R-63 II 2P / 63A | 2P | 63A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 6A | 4P | 6A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 10A | 4P | 10A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 16A | 4P | 16A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 20A | 4P | 20A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 25A | 4P | 25A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 32A | 4P | 32A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 40A | 4P | 40A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 50A | 4P | 50A | Two-position automatic/manual transfer |
| G2R-63 II 4P / 63A | 4P | 63A | Two-position automatic/manual transfer |
Technical Specifications
| Series | G2R-63 II |
|---|---|
| Product Type | Automatic transfer switch |
| Transfer Class | PC class, infrequent operation |
| Operation | Automatic and manual |
| Switching Positions | Two |
| Rated Operational Voltage | AC 110V or AC 220V |
| Rated Operational Current | 6A / 10A / 16A / 20A / 25A / 32A / 40A / 50A / 63A |
| Frequency | 50/60Hz |
| Transfer Time | Less than 50ms |
| Utilization Category | AC-31B |
| Rated Insulation Voltage | 690V |
| Rated Impulse Withstand Voltage | 8kV |
| Mounting | DIN rail |
Short-circuit ratings and certification claims are omitted because the available evidence is not sufficiently consistent for public use.
Applications
The supporting image illustrates a general industrial electrical environment and does not show this product installed.
Dual-Source Distribution Panels
Automatic switching between two compatible AC sources in compact distribution equipment.
Mains and Backup Supply Systems
Transfer of a supported load between normal and alternate supplies after confirming system ratings.
Industrial Control Cabinets
DIN-rail transfer switching where 2P or 4P isolation and the selected current rating fit the design.
Information to Confirm for Selection
- Required pole format: 2P or 4P
- Rated operational current
- Required AC operational voltage
- Normal and alternate source arrangement
- Automatic/manual operation requirement
- Load type and utilization requirements
- Quantity and application
FAQ
Is this a rack ATS PDU?
No. This is a DIN-rail electrical automatic transfer switch for dual-source transfer, not a rack power distribution unit.
Can the switch be operated manually?
Yes. The manufacturer documents both automatic and manual operation.
Which voltage applies to each pole format?
The available evidence lists AC 110V and AC 220V options but does not provide a pole-to-voltage mapping. Confirm both selections when requesting a quotation.
Does the transfer switch provide circuit protection?
Circuit-protection performance is not claimed here. Select and coordinate protective devices separately for the system.
Related Products
Request a Quote
Provide the required pole format, rated current, AC operational voltage, source arrangement, load type, quantity and application.